| Quantity: | |
|---|---|
Laboratory nicotine extraction machine processing line
Nicotine extraction is the process of separating nicotine from tobacco or other plant materials. Here is a basic process for extracting nicotine:
Choose your source material: Nicotine can be extracted from tobacco leaves, but it can also be found in other plants such as eggplant, tomatoes, and potatoes.
Prepare the source material: If using tobacco leaves, remove the stems and chop the leaves into small pieces. If using other plant materials, chop them into small pieces.
Extraction: Place the chopped material into a jar and cover it with a solvent such as ethanol or methanol. Seal the jar and let it sit for several days, shaking it occasionally. The nicotine will dissolve into the solvent.
Filtration: Once the extraction is complete, filter the liquid through a coffee filter or cheesecloth to remove any solid particles.
Evaporation: Pour the filtered liquid into a shallow dish and leave it in a well-ventilated area until the solvent has evaporated, leaving the nicotine behind.
Purification: The extracted nicotine may contain impurities, so it's important to purify it. Dissolve the extracted nicotine in distilled water and add a small amount of hydrochloric acid to create a salt. Filter the solution again to remove any remaining impurities.
Storage: Store the purified nicotine in a tightly sealed container, away from light and heat.
It's important to note that nicotine is a toxic substance and should be handled with care. Extraction should only be done by experienced individuals with proper equipment and safety precautions.
Compliance and Regulations: It's important to comply with all regulations and standards related to nicotine extraction and distribution. This includes obtaining the necessary permits and licenses, complying with health and safety regulations, and following labeling requirements.
Partial equipment list：
1.Glass reactor
A jacketed vessel is a container that is designed for controlling temperature of its contents, by using a cooling or heating "jacket" around the vessel through which a cooling or heating fluid is circulated. The jacket has ability to permits the uniform exchange of heat between the fluid circulating in it and the walls of the vessel.
?JGR-series jacketed glass reactors are designed for reaction and mixing of different types of materials under a specific adjustable temperature and vacuum condition. The reaction lid has different functional ports which allow users to perform different purposes such as adding material to the vessel at a controlled speed, measure the temperature of material, add powder or solids to the vessel, recover the distilled material and so on. The lid is fully customizable according to clients' requirements.
●Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculation fluid temperature and gives you best control over your work. It also helps prevent frost to form on the outside of the vessel, allowing you to see clearly into your material.
●Solvent-resistant PTFE on all sealing components ensures long time durability and operation.
●All glassware is hand-made from food grade high borosilicate 3.3 glass that is heat/cold/corrosion-resistant.
●Adjustable stirring rate provides great torque or high speed.
●Patented PTFE stirring rod bearing for reliable and quiet operation.
●Optional multi-layer stirring blades for optimal reaction results.
●Wide range of temperature operations, from-60°C to 200°C.
●Large condenser cooling surface for exceptional condensation performance.
●Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.
●Easily visual operation with digital speed and temperature displays.
●Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)
●Easy-to-install modular design for exceptional ease and low cost of maintenance
●Zero dead space bottom valve design
2.Rotary Evaporator:
3.Distillation tower:
Laboratory nicotine extraction machine processing line
Nicotine extraction is the process of separating nicotine from tobacco or other plant materials. Here is a basic process for extracting nicotine:
Choose your source material: Nicotine can be extracted from tobacco leaves, but it can also be found in other plants such as eggplant, tomatoes, and potatoes.
Prepare the source material: If using tobacco leaves, remove the stems and chop the leaves into small pieces. If using other plant materials, chop them into small pieces.
Extraction: Place the chopped material into a jar and cover it with a solvent such as ethanol or methanol. Seal the jar and let it sit for several days, shaking it occasionally. The nicotine will dissolve into the solvent.
Filtration: Once the extraction is complete, filter the liquid through a coffee filter or cheesecloth to remove any solid particles.
Evaporation: Pour the filtered liquid into a shallow dish and leave it in a well-ventilated area until the solvent has evaporated, leaving the nicotine behind.
Purification: The extracted nicotine may contain impurities, so it's important to purify it. Dissolve the extracted nicotine in distilled water and add a small amount of hydrochloric acid to create a salt. Filter the solution again to remove any remaining impurities.
Storage: Store the purified nicotine in a tightly sealed container, away from light and heat.
It's important to note that nicotine is a toxic substance and should be handled with care. Extraction should only be done by experienced individuals with proper equipment and safety precautions.
Compliance and Regulations: It's important to comply with all regulations and standards related to nicotine extraction and distribution. This includes obtaining the necessary permits and licenses, complying with health and safety regulations, and following labeling requirements.
Partial equipment list：
1.Glass reactor
A jacketed vessel is a container that is designed for controlling temperature of its contents, by using a cooling or heating "jacket" around the vessel through which a cooling or heating fluid is circulated. The jacket has ability to permits the uniform exchange of heat between the fluid circulating in it and the walls of the vessel.
?JGR-series jacketed glass reactors are designed for reaction and mixing of different types of materials under a specific adjustable temperature and vacuum condition. The reaction lid has different functional ports which allow users to perform different purposes such as adding material to the vessel at a controlled speed, measure the temperature of material, add powder or solids to the vessel, recover the distilled material and so on. The lid is fully customizable according to clients' requirements.
●Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculation fluid temperature and gives you best control over your work. It also helps prevent frost to form on the outside of the vessel, allowing you to see clearly into your material.
●Solvent-resistant PTFE on all sealing components ensures long time durability and operation.
●All glassware is hand-made from food grade high borosilicate 3.3 glass that is heat/cold/corrosion-resistant.
●Adjustable stirring rate provides great torque or high speed.
●Patented PTFE stirring rod bearing for reliable and quiet operation.
●Optional multi-layer stirring blades for optimal reaction results.
●Wide range of temperature operations, from-60°C to 200°C.
●Large condenser cooling surface for exceptional condensation performance.
●Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.
●Easily visual operation with digital speed and temperature displays.
●Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)
●Easy-to-install modular design for exceptional ease and low cost of maintenance
●Zero dead space bottom valve design
2.Rotary Evaporator:
3.Distillation tower: